Heavy Duty Impact Sprinkler with Adjustable Tripod Stand | 360° Brass Spray Head, Ground Spike Legs, Lawn & Garden Irrigation Sprinkler

The Heavy Duty Impact Sprinkler with Adjustable Tripod Stand

The Heavy Duty Impact Sprinkler with Adjustable Tripod Stand is a professional-grade lawn and garden irrigation tool built for homeowners, gardeners, and landscapers who need reliable, wide-coverage watering without the inefficiency of fixed ground-level sprinklers. The brass impact sprinkler head delivers consistent 360-degree rotation coverage across a spray radius of 36 to 44 feet - irrigating a full area of 72 to 88 feet in diameter from a single position.

WHY ELEVATION CHANGES EVERYTHING IN LAWN IRRIGATION

Most ground-level sprinklers sit at grass height. Their spray arc is immediately interrupted by tall grass, garden beds, dense shrubs, and uneven terrain - leaving dry patches that require manual repositioning multiple times per watering session. Elevating the sprinkler head above ground level eliminates this problem entirely.

The adjustable green steel tripod raises the brass impact spray head to 19, 29, or 37 inches above the ground depending on your terrain and coverage needs. At 37 inches, the spray arc clears the tops of most garden plants, lawn grass, and low shrubs - allowing water to reach the full intended radius without obstruction. This is the same principle used in commercial agricultural and sports field irrigation systems scaled down for residential and small farm use.

THREE HEIGHT POSITIONS - SET IT TO YOUR TERRAIN

19 Inches
Low position for flat open lawns with no obstruction. Best for close perimeter watering, raised bed irrigation, and situations where maximum ground stability is the priority over spray elevation.

29 Inches
Mid-height position for standard residential lawns with typical grass growth and low garden borders. Clears most grass and low ground cover for unobstructed 360-degree spray coverage across the full radius.

37 Inches
Maximum height for gardens with tall plants, dense shrubs, flower beds, vegetable patches, and uneven terrain. At 37 inches the spray head delivers the full 36 to 44 foot radius without spray interruption from ground-level obstructions. Best position for large lawn areas, orchards, and farm plot irrigation.

Height adjustment is handled by a flexible adjustable knob on the tripod column - no tools required. Loosen, slide to your preferred position, and tighten. Takes under 30 seconds to change between height settings.

360-DEGREE BRASS IMPACT SPRINKLER HEAD - FULL LAWN COVERAGE

The sprinkler head is a brass impact-style rotary head - the industry standard mechanism for durable, consistent residential and agricultural irrigation. Brass construction resists corrosion, mineral buildup, and UV degradation significantly better than plastic sprinkler heads that crack and discolour after one or two seasons of outdoor use.

The impact mechanism rotates the head continuously through a full 360-degree arc, distributing water evenly across the entire coverage area. The spray radius of 36 to 44 feet means a single sprinkler position covers a full irrigation diameter of 72 to 88 feet - equivalent to a circle of approximately 4,000 to 6,000 square feet from one placement.

GROUND SPIKE LEGS — STABLE UNDER HIGH WATER PRESSURE

The three tripod legs each terminate in a pointed ground spike that inserts directly into the lawn or soil surface. This anchoring system solves the most common failure point of standard sprinkler stands - tipping and sliding under the reactive force of high water pressure coming through the hose line.

Once the three spikes are pushed into the ground, the tripod base is held by both its own weight and the physical anchor of the spikes in the soil. It remains stable and upright throughout the full watering session - even at high hose pressure - without shifting, tipping, or requiring adjustment.

CONNECTS TO ANY STANDARD GARDEN HOSE

The base fitting connects directly to any standard 3/4-inch garden hose with no adapters or additional hardware required. Turn on the tap, let the line pressurize, and the impact head begins its rotation immediately. No batteries. No timers. No programming. Simple, direct, reliable hose-powered operation every time.

WHO THIS SPRINKLER IS BUILT FOR

Homeowners with medium to large lawns who want full coverage watering without repositioning a ground-level sprinkler multiple times.

Vegetable and flower gardeners who need elevated spray coverage above tall plants, raised beds, and dense borders.

Orchard and small farm operators who require a portable, stable elevated sprinkler for plot irrigation without permanent pipe installation.

Landscapers and lawn care professionals who need a reliable portable irrigation solution that sets up in under two minutes on any lawn surface.

Key Features & Benefits

ADJUSTABLE TRIPOD STAND — 19 TO 37 INCHES
Three height positions - 19", 29", and 37" - set with a tool-free flexible adjustment knob. Raise the sprinkler head above grass, plants, and garden borders for unobstructed full-radius spray coverage across the entire lawn area.

BRASS 360° IMPACT SPRINKLER HEAD
Solid brass impact rotary head delivers consistent 360-degree continuous rotation. Brass construction resists corrosion, UV damage, and mineral buildup - outlasting plastic sprinkler heads by several seasons of regular outdoor use.

36–44 FT SPRAY RADIUS | 72–88 FT IRRIGATION DIAMETER
One sprinkler position covers a full irrigation diameter of 72 to 88 feet - up to 6,000 square feet of lawn from a single placement. Covers most standard residential lawn areas without needing to move the sprinkler mid-session.

GROUND SPIKE LEGS — ANCHORED, STABLE, PRESSURE-RESISTANT
Three pointed ground spike legs insert directly into the lawn soil, anchoring the tripod base against the reactive force of high hose pressure. Stays upright and stable throughout the full watering session - does not tip, slide, or shift.

HEAVY DUTY GREEN STEEL TRIPOD FRAME
Powder-coated green steel tripod frame handles repeated outdoor use across multiple seasons. Corrosion-resistant finish maintains appearance and structural integrity through regular rain, sun, and hose water exposure.

STANDARD GARDEN HOSE CONNECTION
Connects directly to any standard 3/4-inch garden hose - no adapters, no tools, no installation. Screw on, turn on the tap, and irrigation begins immediately.

TOOL-FREE ASSEMBLY AND HEIGHT ADJUSTMENT
The full tripod assembles without tools. Height changes in under 30 seconds using the flexible adjustment knob. Set up time from carry to operational is under 2 minutes.

VERSATILE — LAWN, GARDEN, ORCHARD, FARM
Equally effective for residential lawn watering, vegetable garden irrigation, flower bed coverage, orchard plot watering, and small farm plot irrigation.

HOW TO SET UP — 5 EASY STEPS

Step 1: CHOOSE YOUR LOCATION
Pick a flat spot in the lawn with enough clearance for the spray radius. Check wind direction before placing.

Step 2: PUSH SPIKE LEGS INTO SOIL
Press all three ground spike legs firmly into the soil until the tripod sits stable and level on the surface.

Step 3: SET YOUR HEIGHT
Loosen the adjustment knob, slide the column to 19, 29, or 37 inches based on your terrain, and tighten the knob securely.

Step 4: CONNECT THE GARDEN HOSE
Screw the garden hose onto the base fitting. Hand-tighten only - no tools needed.

Step 5: TURN ON AND START WATERING
Turn on the tap fully. The brass impact head begins rotating immediately, covering a full 360-degree irrigation area of 72 to 88 feet in diameter.